The device will reboot automatically after the upgrade has been finished.Ĭlick Status, check if the router’s firmware has been upgraded How do I log into the web-based Utility (Management Page) of TP-Link wireless router?Ĭlick on System Tools-Firmware Upgrade (or Firmware ) click on Browse/Choose File to find the extracted firmware file and click open.Ĭlick the Upgrade button. Login to the TP-Link router’s web management page. Unzip/extract the Firmware from the downloaded. The 6 digits in the firmware means the published date. A list of available firmware will be displayed. Choose the corresponding hardware version, click on Firmware. Then, select the appropriate drop downs for your TP-Link product. Go to download center for your Region on the TP-Link website. If this is the case, you will need to reconfigure the router manually.ĭownload the latest firmware version for your device. In some cases new firmware cannot support a backup file of the older firmware. Please find out the correct hardware version and read the important note before the upgrade.Ģ) Do NOT upgrade the firmware via wireless connectionģ) Do NOT turn off the power or cut down the Ethernet cable during upgrade processĤ）Please pay attention to the Notes of the firmware you downloaded. To check the hardware version of your device please click here.įor example, if you have an Archer C7 version 4, you would choose version 4. Wrong firmware upgrading may damage your device and void the warranty. When upgrading use only firmware for the same hardware version. Please verify the hardware version of your device. This will allow you to communicate with the device.1) Some models have multiple hardware versions. 192.168.1.xxx where “xxx” is any number between 1-254, excluding 20. Configure your PC's IP address to be in the range of the default IP of the device. Have a paperclip or similar object on hand to press the reset button of the device.

You can find it in the download section of Ubiquiti's website. Download the Ubiquiti firmware related to the device that you are looking to recover.Download a TFTP server/client such as PumpKIN TFTP.Prepare Prerequisites for a Ubiquiti TFTP Recovery Processīefore attempting the recovery, perform the following steps: In this article, we explain how to perform this recovery.ġ. Firmware corruption can occur due to a number of reasons, but the most common is by Electro-Static Discharge (ESD), and ESD often occurs due to the use of unshielded cable and connectors.įortunately, Ubiquiti's TFTP recovery method allows the recovery of firmware on most Ubiquiti devices. These difficulties are typically due to some form of firmware corruption. This method is useful when there is an unstable device connection or when the device cannot be accessed.

Ubiquiti's Trivial File Transfer Protocol (TFTP) recovery method is the process followed to recover firmware on Ubiquiti devices.

Upgrade firmware version 1.255 download